IMPORTANT:
You must reuse the door lock arm from your original lock. The new door cylinder does not include the arm.
Professional programming by a locksmith is required.
If your vehicle is not equipped with a remote system, only chip part of key will program to start your vehicle.
OEM Part Numbers:
Ignition Lock Cylinder: 5S4Z-11582-BB
Door Lock Cylinder: 7C3Z-1521990-A
What’s Included:
1 New Ignition Lock Cylinder (Keyed)
1 New Front Left Door Lock Cylinder (Keyed Alike)
2 New Remote Keys With 4 Buttons(With electronics, chip, and battery installed)
Remotes equipped with: Lock, Unlock, Panic, Remote Start
Compatible Vehicles:
2011 – 2014 Ford F-150
2008 – 2016 Ford F-250 / F-350 Super Duty
Programming Notes:
If equipped with PATS (chip-based anti-theft system), keys will need to be programmed by an automotive locksmith or dealership.
Not compatible with vehicles requiring proximity smart keys or push-button start.
Return Policy:
30-Day Return Policy
Items must be returned unused and uninstalled
Step-by-Step Remote Programming Instructions:
Note: You must have all remotes present during programming. Any remotes not included in the procedure will be erased.
Do not press the brake pedal during this process.
Unlock all doors using the power door lock switch on the driver's door panel.
Turn the ignition from OFF to RUN 8 times within 10 seconds, ending on RUN (do not start the engine). The door locks will cycle to confirm entry into programming mode.
Within 20 seconds, press any button on the first remote. The door locks will cycle again to confirm successful programming.
Within 20 seconds, press any button on the second remote. Door locks will cycle again.
Turn the ignition OFF. The door locks will cycle one final time to indicate the end of programming mode.