05-10 Honda Odyssey Keyless Entry Remote 6-Button New PN: G8D-399H-A / OUCG8D-399H-A

Brand New Aftermarket Replacement Key Fob

Compatible with the following vehicle:

• 2005–2010 Honda Odyssey

Step-by-Step Programming Instructions (On-Board):

1. Turn ignition switch to ON (II)

2. Within 4 seconds, press the LOCK or UNLOCK button on one of the remotes (aim at receiver near the glove box)

3. Within 4 seconds, turn ignition switch to LOCK (0)

4. Repeat steps 1–3 two more times using the same remote

5. Within 4 seconds, turn ignition switch to ON (II) again

6. Within 4 seconds, press the LOCK or UNLOCK button on the same remote

   • The door locks should cycle to confirm you're in programming mode

   • Press the LOCK or UNLOCK button again

7. Press the LOCK or UNLOCK button on each additional remote you wish to program

   • Door locks should cycle to confirm each remote was accepted

8. Turn the ignition switch to LOCK (0) to exit programming mode

9. Test all remotes to confirm successful programming