Skip to product information
98-02 GM Keyless Entry Remote 3-Button New PN: 15732803 / KOBUT1BT
1/2

98-02 GM Keyless Entry Remote 3-Button New PN: 15732803 / KOBUT1BT

Product Code: 5960
$13.85

Free shipping over $100

30-day returns

Brand New Aftermarket Remote Key Fob – Fits GM Trucks & SUVs (1998–2002)
FCC ID: KOBUT1BT | CAN: 1983-101-393 | Frequency: 315 MHz
Battery: CR2032 | Buttons: Lock / Unlock / Panic
Replaces PN: 15732803


 Product Description:
This is a brand new aftermarket replacement keyless entry remote compatible with a wide range of GM trucks and SUVs from 1998 to 2002. It includes 3 buttons (Lock, Unlock, Panic) and comes with a pre-installed CR2032 battery.

 Important:
Please verify your FCC ID and part number before purchasing.
Some 2001 vehicles may use FCC ID: KOBLEAR1XT and PN: 15042968 instead.


 Product Features:

  • FCC ID: KOBUT1BT

  • CAN: 1983-101-393

  • Frequency: 315 MHz

  • Battery: CR2032 (included)

  • Buttons: Lock / Unlock / Panic

  • Replaces OEM Part Number: 15732803

  • Condition: Brand New Aftermarket Replacement

  • Programming: On-board programming available for most models. See below.


 Vehicle Compatibility:

  • Chevrolet:
    • 1998–2002 C/K Pickup
    • 1998–2001 Blazer
    • 1999–2002 S10
    • 1999–2001 Silverado
    • 2000–2001 Suburban
    • 2000–2001 Tahoe
    • 2000 Astro

  • GMC:
    • 1998–2001 Jimmy
    • 1999–2002 Sonoma
    • 1999–2001 Yukon
    • 2000–2001 Sierra
    • 2000 Safari

  • Oldsmobile:
    • 1998–2001 Bravada


 Step-by-Step Programming Instructions (On-Board Programming):

  1. Close all vehicle doors.

  2. Insert the key into the ignition.

  3. Hold down the power UNLOCK button on the driver’s door panel and continue to hold until step 9.

  4. Perform steps 5 through 8 in rapid succession:
    -Turn ignition to the ON position (do not start engine).
    -Turn ignition to the OFF position.
    -Turn ignition to the ON position.
    -Turn ignition to the OFF position.

  5. Release the power unlock button. The doors will lock and unlock automatically.

  6. On the remote: Press and hold LOCK and UNLOCK buttons simultaneously. Hold until the door locks cycle again (can take up to 30 seconds).

  7. Repeat step 10 for any additional remotes (including existing ones).

  8. Turn ignition to the ON position to exit programming mode.


You may also like