Skip to product information
07-17 GM Keyless Entry Remote 4-Button New OUC60270
1/2
  • 07-17 GM Keyless Entry Remote 4-Button New OUC60270
  • 07-17 GM Keyless Entry Remote 4-Button New OUC60270
07-17 GM Keyless Entry Remote 4-Button New OUC60270

07-17 GM Keyless Entry Remote 4-Button New OUC60270

Product Code: 9731
$6.54

Free shipping over $100

30-day returns

Brand New Aftermarket Keyless Entry Remote
For Select GM Vehicles | FCC ID: OUC60270 / OUC60221 | 315 MHz | Onboard Programmable

 Product Details:

  • FCC ID: OUC60270 / OUC60221

  • IC: 850K-60270 / 850K-60221

  • Frequency: 315 MHz

  • Battery: CR2032 (pre-installed)

  • Part Numbers: 15913421, 20868672, 20952474

  • Condition: Brand New Aftermarket Replacement

  • Buttons: Lock, Unlock, Panic, Remote Start (varies by model)

 Compatible With:
Cadillac:

  • 2007 – 2010 Escalade

GMC:

  • 2007 – 2017 Acadia

  • 2007 – 2017 Savana

  • 2007 – 2014 Sierra

  • 2007 – 2014 Yukon

Chevrolet:

  • 2007 – 2013 Avalanche

  • 2007 – 2014 Silverado

  • 2007 – 2014 Equinox

  • 2009 – 2017 Traverse

Buick:

  • 2008 – 2017 Enclave

Saturn:

  • 2007 – 2010 Outlook

  • 2008 – 2010 Vue

Pontiac:

  • 2007 – 2009 Torrent

Suzuki:

  • 2007 – 2009 XL-7

 Programming Information:

  • Onboard programming available for most vehicles up to 2010 model year

  • Saturn Vue requires professional programming

  • Later model years (2011+) typically require programming by a locksmith or dealership

 Step-by-Step Programming Instructions:

 For Vehicles With Driver Information Center (DIC) Buttons:

  1. Insert key and turn to ON (do not start engine)

  2. Press the Vehicle Information button until "PRESS TO RELEARN REMOTE KEY" appears

  3. Press the Set/Reset button until "REMOTE KEY LEARNING ACTIVE" is displayed

  4. Press and hold the Lock and Unlock buttons on the remote at the same time for about 15 seconds

  5. A chime will sound indicating successful programming

  6. Repeat step 4 for additional remotes (up to 8 total)

  7. Turn ignition OFF, remove key, and test remote(s)

 For Vehicles Without DIC Buttons (Use Trip Odometer Reset Stem):

  1. Vehicle must be in Park (P) with key in ON position

  2. Press the Trip Odometer Reset Stem until "RELEARN REMOTE KEY" appears

  3. Press and hold the Reset Stem for 3 seconds until "REMOTE KEY LEARNING ACTIVE" appears

  4. Press and hold the Lock and Unlock buttons on the remote for 15 seconds

  5. A chime will sound confirming the remote is programmed

  6. Repeat step 4 for each additional remote (up to 8 total)

  7. Turn key to OFF, remove, and test all remotes

You may also like