04-14 F-150 08-16 F-250 F-350 Ignition & 3 Door Lock Cylinder Set With 2 Remote Keys 3-Button New
Free shipping over $100
30-day returns
IMPORTANT:
-
You must reuse the door lock arm from your original lock. The new door cylinder does not include the arm.
-
All door locks are the same, you may for any of the doors including tailgate.
-
Professional programming by a locksmith is required.
-
If your vehicle is not equipped with a remote system, only chip part of key will program to start your vehicle.
OEM Part Numbers:
-
Ignition Lock Cylinder: 5S4Z-11582-BB
-
Door Lock Cylinder: 7C3Z-1521990-A
What’s Included:
-
1 New Ignition Lock Cylinder (Keyed)
-
1 New Front Left Door Lock Cylinder (Keyed Alike)
-
1 New Front Right Door Lock Cylinder (Keyed Alike)
-
1 New Tailgate Door Lock Cylinder (Keyed Alike)
-
2 New Remote Keys With 3 Buttons(With electronics, chip, and battery installed)
-
Remotes equipped with: Lock, Unlock, Panic
Compatible Vehicles:
-
2004 – 2014 Ford F-150
-
2008 – 2016 Ford F-250 / F-350 Super Duty
Programming Notes:
-
If equipped with PATS (chip-based anti-theft system), keys will need to be programmed by an automotive locksmith or dealership.
-
Not compatible with vehicles requiring proximity smart keys or push-button start.
Step-by-Step Remote Programming Instructions:
Note: You must have all remotes present during programming. Any remotes not included in the procedure will be erased.
-
Do not press the brake pedal during this process.
-
Unlock all doors using the power door lock switch on the driver's door panel.
-
Turn the ignition from OFF to RUN 8 times within 10 seconds, ending on RUN (do not start the engine). The door locks will cycle to confirm entry into programming mode.
-
Within 20 seconds, press any button on the first remote. The door locks will cycle again to confirm successful programming.
-
Within 20 seconds, press any button on the second remote. Door locks will cycle again.
-
Turn the ignition OFF. The door locks will cycle one final time to indicate the end of programming mode.